Tweak3D - Your Freakin' Tweakin' Source!
How to Install SDRAM Memory Into a PC (Page 5/5)

Written By: Dan "Tweak Monkey" Kennedy
Posted: July 10, 2001

Basic Installation Process (cont.)

Turn on the PC, and hopefully the memory test will reflect the changes.

Enter the BIOS configuration utility. Here, I set the DRAM frequency
to 133 MHz, since my motherboard can run the FSB and DRAM at different speeds.

There are no drivers to install with memory, and basically other than setting up and optimizing the BIOS, that's all you need to do. Now, you'll probably want to go play some games, so I'll wrap this article up. :)


Memory is one of the easiest items to install in a PC. As long as you have the correct instructions and safety precautions, it's very easy. And now you know! So don't be afraid to try some of our more advanced "how to" guides now that you've got the really easy ones down. Thanks for reading!

Want to put this guide on one, printer friendly page? Click here!

First Page

  • News
  • Forums
  • Tweaks
  • Articles
  • Reviews